Dimensions and Tolerances

A[Net Web width]		30 - 460	mm
B [Antenna width]		max.460	mm
C [Antenna length]		0 - 500 (± 0,1)	mm
		100 - 176 (± 0,2)	mm
D [Antenna gap in MD]		min. 4	mm
E [Antenna gap in CD]		min. 2	mm
F [Antenna gap from edge]		min. 1	mm
G[Minimum line width at IC, attachment area]		min. 180	µm
H [Minimum line width elsewhere]	30Al	min.450(line length 0-10mm)	µm
		min.500(line length >10mm)	µm
	9Al,	min.350 (line length 0-10mm)	µm
		min.400(line length >10mm)	µm
I [Minimum gap at IC, attachment area]		min. 160	µm
J [Minimum gap elsewhere]		min.200(line length 0-10mm)	µm
		min.200(line length >10mm)	µm
K* [MD pitch tolerance]		± 200	µm
L [CD pitch]		varies	mm
M,N [Line thickness tolerances, measured from cross]		250 (± 50)	µm
Antenna centering on web		± 300	µm
*ContactZhejiang Suntec Electronics Co,.Ltd for available MD-pitch values

Materials

Laminate	AL	High purity aluminium alloy. Foil grade with modest oxide growth tendency.
	PET	Heat stabilized 50µm PET film.
Crossover	N/A
Regulations	Sunteccomplies to 2002/95/EC with the amendments in 2005/618/EC:The restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS).

Quality Assurance

Reliablity	To be tested in inlay format by customer
Yield	Typically >98% (Depends on customer design)

Operating Environment

Temperature	-40…+85°C
Chemicals	Kept away from alkaline or acidic chemicals
Humidity	40% - 80%

Delivery Options& Restrictions

Standard core sizes Ø	76mm
Maximum roll Ø	600mm
Wind direction: Conductor or film side out

Storage and HandlingRFID antenna rolls should be handled with care. Be aware of sharp edges. Use appropriate machinery and safety equipment when handling the rolls. Do not wind the rolls too tight. All roll operating machinery should be grounded. Antistatic materials should be used in contact with web. Use electro static discharge systems. The RFID antenna rolls should be stored under the following conditions: temperature -40...+85 °C(-40...+185 °F), humidity 40 - 80 % RH. The recommended shelf life of a RFID antenna roll is 12 months.RecyclingThe RFID antennas should be disposed of in accordance with local authorityrequirements.Recycling of aluminium is recommended. The material can be disposed aslandfill or by combustion (> 900 °C / 1652 °F).DisclaimerRFID tag manufacturers are advised to conduct their own independent research into individual antennas before making a purchase decision. The antennas should be tested thoroughly under the end-use conditions by the customer. The technical values in this data sheet are subject to change without prior notice. Please contactSuntec for the latest version of this document. All values in this document are a result of testing and experience. The information is believed to be accurate, but it is given without acceptance of liability for loss or damage.