管道打底自动焊机

Automatic welding machine for root pass weld型号：PPAWM-24AModel: PPAWM-24A技术参数：Technical parameters:适用管径：DN50-600（φ60-630）Pipe diameter applicable:DN50-600（φ60-630）适用壁厚：3-30mmPipe wall thickness applicable:3-30mm适用管长：400-8000 mm（对于≤400 mm的管子，采取一定辅助手段后亦可进行焊接）Pipe length applicable:400-8000mm（for pipe dia ≤400 mm , adopt to auxiliary method to welding）适用材质：碳钢、合金钢、不锈钢、低温钢等Materials applicable :carbon steel 、alloy steel 、stainless steel and cryogenic steel适用焊缝：各种管段焊缝，如管子-管子焊缝、管子-弯头焊缝、管子-法兰焊缝、法兰-法兰焊缝、法兰-弯头焊缝等（必要时采用假管过渡联接）Welding line applicable: various welding lines of spool pieces such as pipe-pipe, pipe-elbow, pipe-flange, flange-flange and flange-elbow, etc（a fake pipe transition connection shall be applied if necessary）压紧系统：压紧臂丝杆高度调节压紧Clamping system: clamping arm move up and down by screw控制系统：本公司专有技术产品，PLC控制、文本显示器显示Control system: a product of our patented technology ,PLC control , and show by text display调节系统：驱动方式：电动十字调节摆动器、步进电机驱动Driving system: driven by two-row rubber roller and reducer调节方式：焊枪上下、左右位置无级可调Adjustment way: welding gun up and down , right and left adjustment by stepless调节方法：焊枪上下、左右位置采用按钮方式，在操作过程进行实时、精确对中调节Adjustment method: welding gun up and down, right and left position by button way, during operating procedure to real time, accuracy to center adjustment.摆动系统：Oscillating system:摆动方式：电动十字调节摆动器、步进电机驱动Oscillating mode: adjustment by electric cross oscillator , drive by step motor调节方式：电动十字调节摆动器对焊接摆幅、摆动频率和左右定时等进行无级可调Adjustment mode: welding swing, swing around the frequency and left and right pause time etc by electric cross oscillator to adjustment of stepless调节方法：摆动参数（焊接摆幅、摆动频率和左右定时）采用旋钮+数显调节方式，可在操作过程进行实时调节Adjustment way: swing parameter(welding swing, swing frequency and left and right pause time) use to button+ digital display adjust way, can adjustment in time during operating process焊接系统：Welding system:驱动方式：二排衬胶滚轮、伺服电机+减速器驱动Driving mode: two row with rubber rollers, servo motor + reducer drive调节方式：工件转速变频、无级可调（平稳），干伸长度电动、无级可调Adjustment mode: Workpiece rotation variable frequency, stepless adjustable (stable), cross arm stretch the length of electrical, stepless adjustable调节方法：工件转速/焊接速度采用旋钮+数显调节方式、干伸长度采用按钮方式，均可在操作过程进行实时调节Adjustment mode: Workpiece Rev speed / welding speed adjustment using knob + digital way, cross arm of extending length of use of buttons, can be adjusted in real-time operation process焊接方式：气保打底Welding mode: CO2 gas shielded arc welding and MIG welding process for root pass welding.焊接电源：米勒 Pipepro450 RFCWelding power : Miller Pipepro 450 RFC