Click to enlarge
（以上标价有误，如有需求请来电，给优势价格）
XL-DCT-218电源插头线突拉试验机ABRUPT PULL TESTERUL817
一、用途及特点
本机专门试验插头片与导体之接合强度及导体线之抗突拉强度。试法是将插头片固定于插座内，导线尾端连结冲击锤杆，并连结到电线通断指示灯的插座内，设定好试验次数及突拉高度后即可测试突拉，之后吊上砝码进行扭转试验及接地电流试验。本机可做突拉试验 、扭转试验、荷重试验及接地电流试验。This tester is specialized in testing abrupt / rotary pull strength between the blades and conductor。Fix the blades to the plug fixture and tie the cord to the grip with stripped conductors outside on which the crocodile clips clamp。Afterward，hang the weight assembly onto the grip hook to perform the above test。It can also execute the current test independently。
二、主要技术参数
试料数量Specimen Volume | 6组(sets) |
计 数 器Counter | 0～999999次可调 |
突拉砝码Abrupt pull weight | 2.5LB×6个 |
回转砝码Rotation Weight | 3LB×6个 |
荷重砝码Load Weight | 15LB×6个 |
回转速度Rotation Speed | 15S |
负载电流Load Current | 40A/12V |
突拉高度Abrupt pull Height | 二芯7inch或178mm /三芯10inch或254mm |
工作电源Power | AC 220V 50Hz |
关键词推荐:电源线突拉试验机,突拉测试机,突拉测试仪,电线突拉试验机,东莞突拉机,电动突拉试验机,手动突拉试验机，突拉试验机厂家，突拉测试仪价格，插头线突拉试验机