CAN (Controller Area Network) is a serial bus system especially suited to structure intelligent industry devices networks and build smart automatic control systems. The I-7565 is a cost-efficient device for coupling the CAN-bus to the PC using the standard USB interface. Nowadays the interface is present in every new PC and is supported by the MS-Windows 98, Me, 2000 and XP operating systems. If you establish the connection between the I-7565 and the PC during the runtime of the computer, the PC automatically loads the relevant device driver (hot plug & play).

The following figure shows the application architecture for I-7565 modules. The PC can be the CAN host, monitor or HMI to access/control the CAN device through the CAN network by the I-7565 Converter. This module let you to communicate with CAN devices easily from PC with USB interface.

3000V isolation on CAN sideThe CAN port of I-7565 is an isolated with 3000V isolation. This isolation can protect the local devices from the damage signal coming from CAN network.

Watchdog insideThe I-7565 Watchdog is a hardware reset circuit to monitor the I-7565’s operation status. When working in harsh or noisy environment, the I-7565 may be down by the external signal. The circuit may let the I-7565 to work continuously and never halt.

Power and Error indicator displayThere are two indicators on the I-7565.The power indicator can help user to check whether the I-7565 is standby or transmitting/receiving messages. The Error indicator will be turned on when some errors occur on the I-7565. •Factory Automation •Building Automation •Home Automation •Control System •Monitor System•Vehicle Automation back •RoHs Design •Fully compliant with USB 1.1/2.0(Full Speed) •Fully compatible with the ISO 11898-2 standard •No external power supply is required as I-7565 takes it's power from the USB bus •82C250 CAN transceiver •Transmission speed up to 1M bps for CAN and 921.6K bps for USB •Support both CAN 2.0A and CAN 2.0B •Built-in jumper to select 120 ohm terminal resister •Power, data flow and error indicator for CAN and USB •1000 frames in CAN received buffer•Watchdog inside •Windows 98/ME/2000/XP/Linux drivers support Note: We have verified to drive 100 CAN nodes at the same time via one CAN port of I-7565. back •CAN bus Baud rate configuration•CAN acceptance filter configuration•CAN2.0A or 2.0B specific selection•Checksum and Error Response settings•Easy test to transmit/receive CAN messages back •It has a CAN message field which can display the receiving CAN messages in Decimal or HEX mode•Can display the timestamp of each received CAN message•Users can change the display mode, up-down, down-up or stop•It can count the number of received CAN messages•Data Log : It can save the CAN message as “ txt ” file•Has CAN ID filter function•Can send CAN message to CAN BUS according the defined interval time

Software Download back Item Description

CAN bus Power Meter This is the software solution for the CAN bus power meter(PM-213x-CAN). It is convenient to collect the distributed power information via CAN bus. [more...]

CAN OPC Server This is the OPC server for all the SCADA like LabVIEW, iFix, DASYLab and etc. By using the OPC server, the users be able to control any CAN devices via the famous SCADA. [more...]

VxCAN Driver The VxCAN driver is the virtual CAN driver for all CAN converters and CAN master products. Even using different products, the users could use the same APIs to develop any CAN applications. [more...]

InduSoft Driver The IndoSoft is one of the famous and high performance SCADA. Nowaday, it supports the CAN, CANopen and DeviceNet driver for all the coresponding converter or master series products. [more...]

CANcheck This is the software for diagnosing and testing the user's CAN devices. The graphical interface is ready-made and easy to operate. [more...]

CAN Test Tool The CAN test tool can help users to test the CAN communication of CAN series of ICP DAS by the simple steps. This tool is based on VxCAN driver and supports most of all CAN products of ICP DAS [more...] back Hardware EEPROM 2 KB (for system information), 100,000 erase/write cycles CAN Interface Port Channels 1 Transceiver Philips 82C250 Connector 9-pin male D-Sub (CAN_L, CAN_SHLD, CAN_H, N/A for others) Baud Rate 10 k, 20 k, 50 k, 100 k, 125 k, 250 k, 500 k, 800 k and 1 Mbps Isolation 3000 Vrms on the CAN side Terminator Resistor Selectable 120 Ω terminator resistor by jumper Support Protocol CAN 2.0A/2.0B Receive Buffer 1000 data frames Max Data Flow 250 fps UART Interface Connector USB Type B Baud Rate 921.6 kbps fixed Compatibility USB 1.1 and 2.0 standard Receive Buffer 900 data frames Power Power Consumption 1.5W LED Round LED ON LED: Power and Data Flow; ERR LED: Error Mechanism Installation DIN-Rail Dimensions 72mm x 112mm x 33mm (W x L x H) Environment Operating Temp. -25℃ to 75℃ Storage Temp. -30℃ to 80℃ Humidity 10~90% non-condensing back I-7565-G CR Intelligent USB to CAN converter (RoHS) Include Cable CA-USB18(1.8M Cable)x1 back CNT-CAN CAN bus Connector CA-0910-C 9-pin Female D-sub & 3-wire CAN bus cable (1M) SG-770 7/14 channel Surge Protector