全不锈钢防腐压力表（外卡锁式罩壳、两件式） YTH (518)All Stainless Steel Corrosion-proof pressure gauge(Outside bayonet locked type, Two-piece type)全不锈钢耐震压力表（外卡锁式罩壳、两件式）YTHN (518)All Stainless Steel Vibration-proof pressure gauge(Outside bayonet locked type, Two-piece type)

YTH-100. AO. 518 (YTH-100H)YTH-100. BO. 518 (YTH-100HT)YTH-100. BT. 518 (YTH-100HZT)YTHN-100. AO. 518 (YTH-100H)YTHN-100. BO. 518 (YTH-100HT)YTHN-100. BT. 518 (YTH-100HZT)

BLD/BRIGHTY /耐震压力表/全钢压力表YTN-100H∣/YTF-100H/压力表

简介： 此类（外卡锁式罩壳、两件式）压力表采用独特的不锈钢外壳及测压部件的两件式设计，分为径向、下轴向和下轴向、U型卡子三种安装款式。外壳罩圈具有锁紧及加铅封的功能。表壳顶部设有充液塞，可在现场向表内充液。仪表根据是否充液的选择，可分为YTH及YTHN型。YTH型为不锈钢防腐压力表“干式”；YTHN型为不锈钢耐震压力表“充液型”，通过向表内充液可有效降低表针在工作中的振颤，同时，还可延长仪表内机部件的使用寿命。Brief Introduction The pressure gauge is designed of special Stainless Steel case and two-piece type for pressure element.The mounting types are Bottom mounting, Lower back mounting and Lower back U clamp mounting. The ringcan be locked and lead seal. You could fill liquid on field through the top liquid filling hole. It can be separated to be YTH, YTHN according to whether liquid filling. The YTH is Stainless Steel Corrosion-proof pressure gauge “dry type”; YTHN is Stainless Steel Vibration-proof pressure gauge (Liquid filling type) whose liquid inside wouldreduce the vibration of the pointer and extend the using life.

BLD/BRIGHTY /耐震压力表/全钢压力表YTN-100H∣/YTF-100H/压力表

安装方式：

径向直接安装 下轴向直接安装

下轴向嵌装下轴向U 型卡子安装

主要技术参数： 仪表公称直径：100mm 精度等级：1.5%；（1% 可选） 测量范围：-0.1MPa -70 MPa (型号选择见量程代码表) 防护等级：IP65 环境温度：-40℃～70℃ 介质温度：充液型：-20 ℃至-70℃ 干式-40 ℃至-70℃; 连接螺纹：Z14(Z1/4);Z12(Z1/2) 其它见选型表 仪表外壳：SUS304 外卡锁式罩壳 仪表接头：SUS304 两件式 波 登 管：SUS316 与仪表接头氩弧焊接 密 封 件：丁腈橡胶 仪表充液：充填甘油；232.D1、212C1(干式不充液可选） 仪表机芯：不锈钢 仪表玻璃：仪表平板玻璃，（有机玻璃、聚炭酸脂玻璃、安全双层玻璃可选） 仪表度盘：铝制白底黑色标示，可根据需要特殊加工。

全不锈钢防腐压力表YTH-100ZT

全不锈钢耐震压力表YTHN-100T

全钢耐震压力表YTN-100H

压力表YTHN YTN YTH

真空防腐耐震压力表YTN-100ZH

耐震真空压力表YTN-100Z

BLD/BRIGHTY /耐震压力表/全钢压力表YTN-100H∣/YTF-100H/压力表