I-7565-DNM CR信息

产品详细说明:

I-7565-DNM can represent an economic solution of DeviceNet application and be a DeviceNet master device on the DeviceNet network. It is a "Predefined Master-Slave connection Set". I-7565-DNM supports Group 2 only Server and UCMM functions to communication with slave devices. It has an independent CAN bus communication port and has the ability to cover a wide range of DeviceNet applications. Besides, I-7565-DNM uses the new CAN controller Phillips SJA1000T and transceiver 82C250, which provide bus arbitration, error detection with auto correction and re-transmission function.It can be installed on almost any windows-based system, for example Win98/Win2000/WinXP. It is popularly applied in the industrial automation, building automation, vehicle, marine, and embedded control network. In order to expand the DeviceNet functions of ICPDAS products, I-7565-DNM is developed for this purpose. • Industrial Machinery • Building Automation • Medical • Maritime • Restaurant Appliances• Laboratory Equipment & Research back •Fully compliant with USB 1.1/2.0(Full Speed)•No external power supply is required as I-7565 takes it's power from the USB bus•DeviceNet Version: Volume I & II, Release 2.0•Programmable Master MAC ID and Baud Rate.•Baud Rate: 125k, 250k, 500k•Support Group 2 and UCMM connection•I/O Operating Modes: Poll, Bit-Strobe, Change of State / Cyclic•I/O Length: 512 Bytes max (Input/Output) per slave•Slave Node : 63 nodes max•Support Auto-Search slave device function.•Support on-line adding and removing devices•Support Auto-detect Group 2 and UCMM device•Auto-Reconnect when the connection is broken•Status LED: RUN, MS, NS•Free Software development tools for Windows•Windows 7 32-bit / 64-bit drivers supported•Windows 98/ME/2000/XP drivers supported•Linux drivers supported

back •Programmable Master MAC ID•Programmable transfer-rate 125K, 250K, 500K•Each port support maximum nodes up to 64•Support Group 2 Only Server functions•Support UCMM functions•Predefined Master-Slave Connection Set•The maximum Fragment number is (Input/Output) up to 64•Support I/O Operation Mode: Poll, Bit-Strobe and Change Of State/Cyclic•Support Auto-Scan slave device function•Support on-line adding and removing devices•Support Auto-Reconnect when the connection is broken

We have communicated with the following DeviceNet slaves

1.Allen-Bradley PowerFlex series DeviceNet Inverters2.BECKHOFF CX1500-B520 series DeviceNet I/O modules3.BECKHOFF BK5250 series DeviceNet I/O modules4.MKS 683 series DeviceNet exhaust throttles5.MKS MFC (Mass Flow Controller) series DeviceNet devices6.MKS DELTA II FRC (Flow Ratio Controller) series DeviceNet devices7.MKS DC Power Generator (OPT- xxx) series DeviceNet devices8.OMRON DRT1-ID/ODxx series DeviceNet I/O modules9.OMRON DRT2-MDxx series DeviceNet I/O modules10.COSMOS PS-7 series DeviceNet gas detectors11.CELERITY UNIT IFC-125 series DeviceNet devices back back Diagnosis

This utility supports to search all devices and specific devices in the network. These functions help the users to configure the connection of the slave devices. Anymore, the software also can diagnose the remote slave devices when building the DeviceNet network.

Configuration

This software supports the users to configure the I/O connection of the devices by searching devices or manual setting. After configuring the I/O connection, the information would be saved into the EEPROM of the I-7565-DNM. The users can export the data from the EEPROM easily. Correspondingly, the users can import the data into the EEPROM.

Remote I/O accessThe software utility can easily to access the I/O data of all the slave devices. The users can monitor the input data of the specific slave device and change the output data to the remote slave device with this utility.

back

InduSoft Web Studio is a powerful, integrated collection of automation tools that includes all the building blocks needed to develop modern Human Machine Interfaces (HMI), Supervisory Control and Data Acquisition (SCADA) systems, and embedded instrumentation and control application.

In order to apply the field bus communication by InduSoft software, ICP DAS provides several field bus components such as CAN, CANopen, DeviceNet and so on, in the InduSoft driver. By means of these drivers, you don't need to have the complex and abstruse background of these field bus protocols. Only few simple steps can finish the communication between your PC and the remote devices.

PC Platform File Select WinXP / Win7 InduSoft CAN Driver (IDCAN) for PC/XPAC-8000 (The InduSoft driver list ) Supported Devices CAN bus series I-7530, I-7530A, I-7540D, I-7565, I-7565-H1, I-7565-H2, PISO-CAN100U, PISO-CAN200U, PISO-CAN400U, PISO-CAN800U, PEX-CAN200i, PISO-CM100U CANopen series PISO-CPM100U, I-7565-CPM DeviceNet series PISO-DNM100U, I-7565-DNM

PAC Platform File Select XPAC-8000 / XPAC-8000-Atom InduSoft CAN Driver (IDCAN) for PC/XPAC-8000(The InduSoft driver list ) XPAC-8000-CE6 / XPAC-8000-Atom-CE6 InduSoft CAN Driver (IDCAN) for XPAC-8000-CE6(The InduSoft driver list ) WinPAC / ViewPAC InduSoft CAN Driver (IDCAN) for WinPAC and ViewPAC(The InduSoft driver list ) Supported Device CAN bus series I-8120W CANopen series I-8123W DeviceNet series I-8124W back In order to develop complex DeviceNet applications, we provide a LabVIEW driver for this purpose. The I-7565-DNM LabVIEW driver is the function reference to the DeviceNet master. We provide many useful VI functions in the LabVIEW environment. We also have the "DeviceNet Master Utility" to configure the DeviceNet hardware in your PC. The users not only operate easily and develop application rapidly, but also reduce the complexity of applications. The users can communicate with the remote DeviceNet devices in a few simple steps and need not to know about the detail of the DeviceNet protocol. It is the best tool to develop various distributed systems and other industrial applications software on DeviceNet network.

back Hardware CPU 80186, 80 MHz or compatible SRAM/Flash/EEPROM 512 KB / 512 KB / 16 KB ESD Protection 2 kV class A CAN Interface Controller NXP SJA1000T with 16 MHz clock Transceiver NXP 82C250 Channel number 1 Connector 9-pin male D-Sub (CAN_GND, CAN_L, CAN_SHLD, CAN_H, CAN_V+, N/A for others) Baud Rate (bps) 125 k, 250 k, 500 k Transmission Distance (m) Depend on baud rate (for example, max. 1000 m at 50 kbps ) Isolation 3000 VDC for DC-to-DC, 2500 Vrms for photo-couple Terminator Resistor Jumper for 120 Ω terminator resistor Specification ISO-11898-2, CAN 2.0A and CAN 2.0B Protocol DeviceNet Volumn I ver2.0, Volumn II ver2.0 USB Interface Connector USB Type B Transmission speed 921.6 kbps Specification USB 1.1 and USB 2.0 LED Round LED PWR LED, RUN LED, NS LED, MS LED Software Driver Windows 98/ME/NT/2K/XP/7 Library VB 6.0, VC++ 6.0, BCB 6.0 Power Power supply By USB interface Power Consumption 3 W Mechanism Installation DIN-Rail Dimensions 72mm x 101mm x 33mm (W x L x H) Environment Operating Temp. -25 ~ 75 ℃ Storage Temp. -30 ~ 80 ℃ Humidity 10 ~ 90% RH, non-condensing back I-7565-DNM-G CR USB/DeviceNet Master communication Converter with D-sub 9-pin connector back CNT-CAN CAN bus Connector CA-0910-C 9-pin Female D-sub & 3-wire CAN bus cable (1M) SG-770 7/14 channel Surge Protector