I-7520 CR信息

产品详细说明:

I-7520/I-7520A/I-7520R/I-7520ARI-7520: Isolated RS-232 to RS-485 ConverterI-7520A: Isolated RS-232 to RS-422/485 ConverterI-7520R: RS-232 to Isolated RS-485 ConverterI-7520AR: RS-232 to Isolated RS-422/485 Converter •Automatic RS-485 Direction Control •ESD Protection for the RS-232/422/485 Data Line •Power Input, +10 ~ +30 VDC •3000 VDC Isolation Protection on the RS-485 side •Transmission Speed of up to 115200 bps •Operating Temperatures, -25 °C ~ +75 °C •DIN-Rail Most industrial computer systems provide standard RS-232 serial ports. Though widely accepted, RS-232 has limited transmission speed, range, and networking capabilities. The RS-422 and RS-485 standards overcome these limitations by using differential voltage lines for data and control signals, which transparently converts RS-232 signals into isolated RS-422 or RS-485 signal with no need to change any hardware or software. The I-7520/I-7520A lets you easily build an industrial grade, long-distance communication system using standard PC hardware.

The design of the isolation between the I-7520 and the I-7520R/AR is different. If the user wants to supply power from the PLC/PC, the I-7520R/AR should be used, otherwise the isolation will be broken. Refer to the I-7000 bus converter manual for detailed information. Models I-7520 I-7520R I-7520A I-7520AR Serial Interface RS-232 TxD, RxD, GND RS-422 V TxD+, TxD-, RxD+, RxDThe RS-422 and RS-485 cannot be used simultaneously RS-485 Data+, Data- Transfer Distance Max. 1,200 m at 9.6 kbps; Max. 400 m at 115.2 kbps(Belden 9841 2P twisted-pair cable, if different cables are used, the transmission distance may change) Self-Tuner Asic Inside Yes Speed 300 ~ 115200 bps ESD Protection Yes 3000 VDC Isolation on CH1 ~ CH4 on RS-232 side on RS-485 side on RS-232 side on RS-485 side Connection RS-232 9-Pin Female D-Sub RS-422/485 Removable 10-Pin Terminal Block LED Indicators Power/Communication Yes Power Input Voltage Range +10 VDC ~ +30 VDC (Non-isolated) Power Consumption 1.2 W Mechanical Casing Plastic Flammability Fire Retardant Materials (UL94-V0 Level) Dimensions (W x H x D) 72 mm x 118 mm x 35 mm Installation DIN-Rail Environment Operating Temperature -25 °C ~ +75 °C Storage Temperature -30 °C ~ +75 °C Humidity 10 ~ 90% RH, non-condensing I-7520 CR Isolated RS-232 to RS-485 Converter (RoHS) I-7520A CR IsolIsolated RS-232 to RS-422/485 Converter (RoHS) I-7520-G CR Isolated RS-232 to RS-485 Converter (Gray Cover) (RoHS) I-7520A-G CR Isolated RS-232 to RS-422/485 Converter (Gray Cover) (RoHS) I-7520R CR RS-232 to Isolated RS-485 Converter (RoHS) I-7520AR CR RS-232 to Isolated RS-422/485 Converter (RoHS) I-7520R-G CR RS-232 to Isolated RS-485 Converter (Gray Cover) (RoHS) I-7520AR-G CR RS-232 to Isolated RS-422/485 Converter (Gray Cover) (RoHS) GPSU06U-6 24 VDC/0.25 A, 6 W Power Supply DIN-KA52F 24 VDC/1.04 A, 25 W Power Supply with Din-Rail Mounting I-7510 CR Isolated RS-485 Repeater (RoHS) I-7510A CR Isolated RS-422/485 Repeater (RoHS) CA-0915 9-Pin Male-Female D-Sub Cable, 1.5 m