点击图片查看原图
企业认证
产品详细说明:ENCODER300ISA Bus, 3-axis Encoder Interface Card ·Accepts Inputs from Incremental or Quadrature Encoders ·3 independent axes ·Max. Quadrature Input Frequency: 1 MHz ·Counts per Encoder Cycle: X1, X2, X4 (Software selectable) ·Encoder Input Modes: Quadrature , Up/Down , Pulse/Direction
•Accepts Inputs from Incremental or Quadrature Encoders•3 independent axes•Max. Quadrature Input Frequency: 1 MHz•Counts per Encoder Cycle: X1, X2, X4 (Software selectable)•Encoder Input Modes: Quadrature , Up/Down , Pulse/Direction The ENCODER300 is a 3-axis quadrature encoder interface board for IBM PC/AT bus-compatible devices. Phase 0, phase 90 and index pulse inputs are provided for each encoder. Inputs may be single ended (A, B or C) or differential (A+, A-, B+, B-, C+ or C-). Power and ground connections are also provided for use by the encoder if needed. Inputs are conditioned by a four-stage digital fi lter, and the maximum input rate in quadrature decode mode is 1 MHz. The conditioned inputs are applied to a 16-bit counter, which may be used for quadrature decoding, pules or direction-input counting, or as a pulse input up/down counter. General Number of Axis 3 Slot Interface ISA Bus Resolution 16 bit Mode Quadrant, CW_CCW, PULSE_DIR Maximum Counting Rate 1 MHz Digital Output Channels - I/O Isolation - Connector 25-pin D-Sub Power Consumption +5 V @ 500 mA Environmental Operating Temperature 0 ~ +60 °C Storage Temperature -20 ~ +80 °C Ambient Relative Humidity 0 ~ 90 % RH, condensing Software Support Windows Driver/DLL/Lib Windows 95/98/ME/NT4.0 DOS Library DOS 6.2 Labview Development Kit - Linux Library - ENCODER300 ISA Bus, 3-axis Encoder Interface CardInclude: CA-PC25M (25-pin Male D-Sub Connector with Plastic Cover) DN-25 I/O Connector Block with 25-pin/9-pin D-Sub Connector (DIN-Rail Mounting)
