A-626/S CR信息

产品详细说明:

The A-626,A-628 are 12-bit analog output boards with 16 channel digital input and 16 channel digital output .The A-626,A-628 boards support both current and voltage range .The output channel can be jumper selectable for different voltage range ;+/-10 V, +/-5 V, 0 ~ 5 V, 0 ~ 10 V and can sink 4 ~ 20 mA current when connected to an external voltage source. On board reference chip BB Ref-01 is used for solving the thermo-drifting problem of the reference voltage Therefore A-626 is much better than 726 families for long period operation. Lattice FPGA on board can increase the stability of the board. back Backward compatible to 726 series 6 or 8 analog output channels 12-bit resolution 0 ~ 5 V,0 ~ 10 V,*5 V,*10 V output range 4 ~ 20 mA current loop capability ,sink to ground On board reference -5 V, -10 V External reference *10 V (max.) AC or DC External Interrupt request signals, IRQ level from IRQ 3 ~ IRQ 15 16-channel digital input and 16 channel digital output Connects directly to DB-16P,DB-16R DN-20,DN-37, 782 and 785 families back Signal analysis Industrial automation Laboratory automation Sensor interface FFT & frequency analysis Transient analysis Production test Process control back DOS sample program(with source codes) DLL and OCX SDK for Windows 98/NT/2000 DLL and OCX SDK for 32-bit Windows XP/2003/Vista/7 VB/VC/Delphi/BCB sample programs with source codes are included LabVIEW toolkit for Windows Driver for Linux and DasyLab back Model Name A-626 A-628 Analog Output Channels 6 8 Resolution 12-bit Accuracy 0.01% of FSR ± 1 LSB @ 25 °C, ± 10 V Output Range Unipolar: 0 ~ 5 V, 0 ~ 10 VBipolar:+/- 5 V, +/- 10 V Output Driving +/- 5 mA Slew Rate 0.6 V/μs Output Impedance 0.1 Ω max. Operating Mode Software Digital Input Channels 16 Compatibility 5 V/TTL Input Voltage Logic 0: 0.8 V max.Logic 1: 2.0 V min. Response Speed 1.0 MHz (Typical) Digital Output Channels 16 Compatibility 5 V/TTL Output Voltage Logic 0: 0.4 V max.Logic 1: 2.4 V min. Output Capability Sink: 0.8 mA @ 0.8 VSource: -2.4 mA @ 2.0 V Response Speed 1.0 MHz (Typical) General Bus Type ISA I/O Connector Female DB37 x 120-pin box header x 2 Dimensions (L x W x D) 157 mm x 106 mm x 22 mm Power Consumption 0.9 A @ +5 V (Max.)110 mA @ +12 V (Max.)90 mA @ -12 V (Max.) 1.1 A @ +5 V (Max.)130 mA @ +12 V (Max.)105 mA @ -12 V (Max.) Operating Temperature 0 ~ 60 °C Storage Temperature -20 ~ 70 °C Humidity 5 ~ 85% RH, non-condensing back A-626 CR 6-channel 12-bit Analog Output and Digital I/O Board (RoHS)Includes one CA-4002 D-Sub connector. A-626/S A-626 + DB-37 A-628 8-channel 12-bit Analog Output and Digital I/O BoardIncludes one CA-4002 D-Sub connector. A-628/S A-628 + DB-37 back CA-2010 20-pin flat cable,1 M CA-2020 20-pin flat cable 2 M. CA-3710 DB-37 Male-Male D-sub cable 1 M (Cable for Daughter Board(45°)) CA-3710D DB-37 Male-Male D-sub cable 1M (Cable for Daughter Board(180°)) CA-3710DM DB-37 Male-Male Cable, 1.0 M, 180°. (RoHS) CA-3730DM DB-37 Male-Male Cable, 3.0 M, 180°. (RoHS) CA-3750DM DB-37 Male-Male Cable, 5.0 M, 180°. (RoHS) CA-4002 37-pin Male D-sub connector with plastic cover. DB-37 Directly connect signal to D-sub 37-pin connector DN-37 DIN Rail Mounting 37-pin Connector DB-16P 16-channel Isolated Digital Input Daughter Board DB-16R 16-channel Relay Output Daughter Board DN-20 I/O Connector Block with DIN Rail Mounting and 20 -PIN Header back

I/O Card Main Page