ISO-730 CR信息

产品详细说明:ISO-73032-channel Isolated digital I/O and 32-channel TTL digital I/O Board. •16-channel optically isolated digital input •16-chanel optically isolated open-collector output •16-channel TTL level digital input (Non-isolation) •16-channel TTL level digital output (Non-isolation) •One 37-pin D-sub connector and two 20-pin headers for isolated I/O •Two 20-pin header for TTL digital I/O (Non-Isolation) •Built-in DC/DC converter with 3000 VDC isolation •Interrupt handling •Interrupt source : channel 0 and channel 16 •3750 Vrms photo-isolation protection The ISO-730 card provide 32 isolated digital I/O channels (16 x DI and 16 x DO) and 32 TTL-level digital I/O channels (16 x DI and 16 x DO). Each of the 16 isolated digital input channel accept voltage from 5 V ~ 24 VDC and has a resistance of 1.2 kOhm. Every eight input channels use one external common ground. For example, channel 0 ~ 7 use EI.COM1 and channel 8 ~ 15 use EI-COM2. Each of the 16 isolated digital output channels equipped a darlington transistor. Every eight output channels use the common emitters. The power supply of the output port should use the external power. The channels 0 ~ 7 use EO-COM1 and channel 8 ~ 15 use EO-COM2. This interface board is easy installed in any PC/AT/XT. The board interface to field logic signed, eliminating ground loop problems and isolating the host computer from damaging voltages. The ISO-730 has one 37-pin D-sub connector and four 20-pin header. It is fully compatible to PCL-730. •Factory Automation. •Product Test. •Laboratory Automation. •DLL and OCX SDK for Windows 98/NT/2000 •DLL and OCX SDK for 32-bit Windows XP/2003/Vista/7 •VB/VC/Delphi/BCB sample programs with source codes are included. •LabVIEW toolkit for Windows. •Driver for Linux and DasyLab. Digital Input Isolation Voltage 3750 Vrms Channels Isolated 16 Non-Isolated 16 Compatibility Isolated Optical Non-Isolated 5 V/TTL Input Voltage Isolated Logic 0: DC 0 ~ 1 VLogic 1: DC 9 ~ 24 V Non-Isolated Logic 0: 0.8 V (max.)Logic 1: 2.0 V (min.) Input Impedance 1.2 KΩ, 0.5 W Response Speed Isolated 10 kHz Non-Isolated 30 kHz Digital Output Digital Output 3750 Vrms Channels Isolated 16 Non-Isolated 16 Compatibility Isolated Sink, Open Collector Non-Isolated 5 V/TTL Output Voltage Non-Isolated Logic 0: 0.8 V (max.)Logic 1: 2.4 V (min.) Output Capability Isolated Sink: 100 mA @ 30 VDC (max.) Non-Isolated Sink: 8 mA @ 0.5 V (max.)Source: 0.4 mA @ 2.4 V (min.) Response Speed Isolated 10 kHz General Bus Type ISA I/O Connector Female DB37 x 1Male DB9 x 4 Dimensions (L x W x D) 175 mm x 124 mm x 22 mm Power Consumption 800 mA @ +5 V Operating Temperature 0 ~ 60 °C Storage Temperature -20 ~ 70 °C Humidity 5 ~ 85% RH, non-condensing ISO-730 CR 32-channel Isolated digital I/O and 32-channel TTL digital I/O Board. (RoHS)Includes one CA-4002 D-Sub connector. CA-2002 20-pin flat cable,20 cm x 2 CA-2010 20-pin flat cable,1 M CA-2020 20-pin flat cable 2 M CA-3710 DB-37 Male-Male D-sub cable 1 M (Cable for Daughter Board(45°)) CA-3710D DB-37 Male-Male D-sub cable 1M (Cable for Daughter Board(180°)) CA-3710DM DB-37 Male-Male Cable, 1.0 M, 180°. (RoHS) CA-3730DM DB-37 Male-Male Cable, 3.0 M, 180°. (RoHS) CA-3750DM DB-37 Male-Male Cable, 5.0 M, 180°. (RoHS) DB-37 Directly connect signal to D-sub 37-pin connector DN-37 DIN Rail Mounting 37-pin Connector DB-16R Isolated Relay output Daughter board DB-16P Isolated Digital Input Daughter Board I/O Card Main Page