PISO-730-5V CR信息

产品详细说明:

PISO-730U/PISO-730-5VUniversal PCI, 32-channel Isolated Digital I/O and 32-channel TTL Digital I/O Board (Current Sinking) •Universal PCI, supports both +5 V and +3.3 V PCI bus for PISO-730U/730U-5V •Supports +5 V PCI bus for PISO-730/730-5V •64 DIO channels (32 Isolated channels, 32 Non-isolated channels) •3750 Vrms photo-isolation protection •Built-in DC/DC converter with 3000 VDC isolated •Two interrupt sources •SMD, short card, power saving •Supports Plug & Play to obtain I/O resources •No more manually setting of I/O address and IRQ •Output status readback function for PISO-730U/730U-5V •Card ID function for PISO-730U/730U-5V PISO-730U cards provide 32 isolated digital I/O channels (16 x DI and 16 x DO) and 32 TTL-level digital I/O channels (16 x DI and 16 x DO). Both the isolated DI and DO channels use a short optical transmission path to transfer an electronic signal between the elements of a circuit and keep them electrically isolated. With 3750 Vrms isolation protection, these DIO channels allow the input signals to be completely floated so as to prevent ground loops and isolate the host computer from damaging voltages. Each digital output offers a Darlington (NPN) transistor and integrated suppression diode for the inductive load. The open collector outputs (DO channels) are typically used for alarm and warning notification, signal output control, control for external circuits that require a higher voltage level, and signal transmission applications, etc.

The PISO-730U also adds a Card ID switch on-board. Users can set Card ID and then recognize the board by the ID via software when using two or more PIO-730U cards in one computer.

The new PISO-730U card is designed as a drop-in replacement for the PISO-730, and users can replace the PISO-730 by the PISO-730U directly without software/driver modification. This card support various OS versions, such as Linux, DOS, Windows 98/NT/2000, 32/64-bit Windows 7/Vista/XP. DLL and Active X control together with various language sample programs based on Turbo C++, Borland C++, Microsoft C++, Visual C++, Borland Delphi, Borland C++ Builder, Visual Basic, C#.NET, Visual Basic.NET and LabVIEW are provided in order to help users quickly and easily develop their own applications. •Factory automation •Product test •Laboratory automation •DOS Lib and TC/BC/MSC sample program (with source codes). •DLL and OCX SDK for Windows 95/98/NT/2K. •DLL and OCX SDK for 32-bit and 64-bit Windows XP/2003/Vista/7. •VB/VC/Delphi/BCB/VB.NET/C#.NET/VC.NET/MATLAB sample programs with source codes. •LabVIEW toolkit for Windows. •Driver for Linux. Model Name PISO-730 PISO-730U PISO-730U-5V PISO-730-5V Digital Input Isolation Voltage 3750 Vrms Channels Isolated 16 Non-Isolated 16 Compatibility Isolated Optical Non-Isolated TTL Input Voltage Isolated Logic 0: 0 ~ 1 VLogic 1: 9 ~ 24 V(Logic 1: Min. 7 V; Max. 30 V) Logic 0: 0 ~ 1 VLogic 1: 5 ~ 12 V(Logic 1: Min. 3.5 V; Max. 16 V) Non-Isolated Logic 0: 0.8 V max.Logic 1: 2.0 V min. Input Impedance 1.2 KΩ, 1 W - Response Speed Isolated 4 kHz (Typical) Non-Isolated 1.2 MHz (Typical) Digital Output Isolation Voltage 3750 Vrms Channels Isolated 16 Non-Isolated 16 Compatibility Isolated Sink, Open Collector Non-Isolated 5 V/TTL Output Voltage Non-Isolated Logic 0: 0.4 V max.Logic 1: 2.4 V min. Output Capability Isolated 100 mA/+30 V for one channel @ 100% duty Non-Isolated Sink: 2.4 mA @ 0.8 VSource: 0.8 mA @ 2.0 V Response Speed Isolated 4 kHz (Typical) Non-Isolated 1.2 MHz (Typical) General Bus Type 3.3 V / 5 V Universal PCI, 32-bit, 33 MHz 3.3 V / 5 V Universal PCI, 32-bit, 33 MHz 3.3 V / 5 V Universal PCI, 32-bit, 33 MHz Data Bus 8-bit Card ID - Yes(4-bit) - I/O Connector Female DB37 x 120-pin box header x 2 Dimensions (L x W x D) 180 mm x 105 mm x 22 mm Power Consumption 600 mA @ +5 V Operating Temperature 0 ~ 60 °C Storage Temperature -20 ~ 70 °C Humidity 5 ~ 85% RH, non-condensing PISO-730U CR Universal PCI Bus, 32-channel isolated digital I/O & 32-channel TTL digital I/O board. (current sinking) (RoHS)Includes one CA-4002 D-Sub connector. PISO-730 CR 32-channel isolated digital I/O & 32-channel TTL digital I/O board. (current sinking) (RoHS)Includes one CA-4002 D-Sub connector. PISO-730-5V CR 32-channel isolated digital I/O (Input Logic High: 5~12 V) & 32-channel TTL digital I/O board. (current sinking) (RoHS)Includes one CA-4002 D-Sub connector. PISO-730U-5V CR Universal PCI Bus, 32-channel isolated digital I/O (Input Logic High: 5~12 V) & 32-channel TTL digital I/O board. (current sinking) (RoHS)Includes one CA-4002 D-Sub connector. CA-2002 20-pin flat cable,20 cm x 2 CA-2010 20-pin flat cable,1 M CA-2020 20-pin flat cable 2 M CA-3710 DB-37 Male-Male D-sub cable 1 M (Cable for Daughter Board(45°)) CA-3710D DB-37 Male-Male D-sub cable 1M (Cable for Daughter Board(180°)) CA-3710DM DB-37 Male-Male Cable, 1.0 M, 180°. (RoHS) CA-3730DM DB-37 Male-Male Cable, 3.0 M, 180°. (RoHS) CA-3750DM DB-37 Male-Male Cable, 5.0 M, 180°. (RoHS) CA-4002 37-pin Male D-sub connector with plastic cover. DB-37 Directly connect signal to D-sub 37-pin connector DN-37 DIN Rail Mounting 37-pin Connector DN-20 Two 20-pin header DIN-rail terminal board DB-16P 16-channel isolated D/I board DB-16R 16-channel relay board ADP-20/PCI 20-pin extender I/O Card Main Page