PISO-DA2U CR信息

产品详细说明:

PISO-DA2UUniversal PCI, 2-channel Isolated Analog Output Board •Supports both +5 V and +3.3 V PCI bus for PISO-DA2U •Supports +5 V PCI bus for PISO-DA2 •Two independent 12-bit analog output channels •3750 VDC bus and channels isolation protection •3000 VDC power isolation protection •Software calibration •Unipolar or bipolar output available from each converter •Two pacer timer interrupt source •Double-buffered D/A latch •The calibration data is fully stored in EEPROM The PISO-DA2U has 2 analog output channels with high-voltage isolation protection and provides universal PCI interface (3.3 V/5 V). The PISO-DA2U is fully compatible with the PISO-DA2, and users can replace the PISO-DA2 by the PISO-DA2U directly without software/driver modification.

The built-in high-quality isolation components on the PISO-DA2U make it featuring 3750 VDC bus-typed and channel-channel isolation, and offer durable abilities. For the PISO-DA2U, the voltage output ranges are +/-10 V, +/-5 V, 0~+10 V and 0~+5 V and the current output ranges are 0 ~ 20 mA and 4 ~ 20 mA. In addition, the PISO-DA2U also features the following advantages by ICP DAS's innovation:

1.1. Accurate and easy-to-use calibration:ICP DAS provides the software calibration instead of the manual calibration so that no jumpers and trim-pots are required anymore. The calibration data can be saved in the EEPROM for long-term use. 2.Channel to channel configuration:Each channel can be individually configured as voltage or current output with different output range. 3.Card ID:ICP DAS provides the card ID function for PISO-DA2U. Users can set a card ID for each card so that when more than two boards are used in a computer at the same moment, users can still instantly recognize them one by one.PISO-DA2U supports a wide range of operating systems like Linux, DOS, Windows 98, Windows 2000, Windows NT and Windows XP 32-Bit. Moreover, ICP DAS provides all the DLL and Active X for users, and sample programs covering from Turbo C++, Borland C++, Microsoft C++, Visual C++, Borland Delphi, Borland C++ Builder, Visual Basic, C#.NET, Visual Basic.NET and LabView are also provided for intuitive and fast learning! •High speed data acquisition system. •Harsh environment operation. •Signal isolation. •DOS Lib and TC/BC/MSC sample program (source codes included) •DLL SDK for Windows 98/NT/2000 •DLL SDK for 32-bit and 64-bit Windows XP/2003/Vista/7 •VB/VC/Delphi/BCB/VB.NET/C#.NET/VC.NET/MATLAB sample programs with source codes. •LabVIEW toolkit for Windows. •Driver for Linux. Model Name PISO-DA2 PISO-DA2U Analog Outputs Isolation Voltage 3750 V (Bus Type, CH-to-CH) Channels 2 Resolution 12-bit Accuracy 0.015% of FSR ± 1/2 LSB @ 25 °C, ± 10 V Output Range Voltage: +/-10 V, +/-5 V, 0 ~ 10 V, 0 ~ 5 VCurrent: 0 ~ 20 mA, 4 ~ 20 mA Output Driving +/- 5 mA Slew Rate 0.3 V/μs Output Impedance 0.1 Ω max. Operating Mode Software General Bus Type 5 V PCI, 32-bit, 33 MHz 3.3 V/5 V Universal PCI, 32-bit, 33 MHz Data Bus 8-bit Card ID No Yes(4-bit) I/O Connector Male DB9 x 2 Dimensions (L x W x D) 170 mm x 122 mm x 22 mm 189 mm x 98 mm x 22 mm Power Consumption 1350 mA @ +5 V Operating Temperature 0 ~ 60 °C Storage Temperature -20 ~ 70 °C Humidity 5 ~ 85% RH, non-condensing PISO-DA2U CR Universal PCI, Isolated 12-bits analog output boardIncludes two CA-PC09M D-Sub connectors. PISO-DA2 Isolated 12-bits analog output boardIncludes two CA-PC09M D-Sub connectors. PISO-DA2U/S PISO-DA2U with DB-8425 daughter board PISO-DA2/S PISO-DA2 with DB-8425 daughter board CA-PC09M 9-pin Male D-sub connector with plastic cover. DB-8425 Provided for easy wire connection with the controlled device or equipment I/O Card Main Page