产品详细说明:PCI-822LU 32/16 路 250 kHz 12 位,多功能卡•Supports both +5 V and +3.3 V PCI bus•Card ID function[A/D]•One A/D converter with maximum 250 k Samples/Sec.•12-bit resolution A/D converter•8 K samples hardware FIFO•32 single-ended/16 differential analog inputs•Built-in MagicScan Controller•Interrupt function•Two different A/D trigger: software trigger, pacer trigger.•Programmable gain control, programmable offset control[D/A]•2-ch 16-bit voltage output.•Voltage output range: +/-10 V, +/-5V, 0 ~ 10 V, 0 ~ 5 V [DIO]•32-ch programmable DI/DO•Pull high/pull low function on DI•DO status read back•High speed data transfer rate.
·Supports both +5 V and +3.3 V PCI bus ·Card ID function[A/D] ·One A/D converter with maximum 250 k Samples/Sec. ·12-bit resolution A/D converter ·8 K samples hardware FIFO ·32 single-ended/16 differential analog inputs ·Built-in MagicScan Controller ·Interrupt function ·Two different A/D trigger: software trigger, pacer trigger. ·Programmable gain control, programmable offset control[D/A] ·2-ch 16-bit voltage output. ·Voltage output range: +/-10 V, +/-5V, 0 ~ 10 V, 0 ~ 5 V [DIO] ·32-ch programmable DI/DO ·Pull high/pull low function on DI ·DO status read back ·High speed data transfer rate. |
模拟量输入 | 基本规格 | 通道 | 32 单端/16差分 | |
分辨率 | 12-bit | |||
板载FIFO | 8192 samples | |||
采样速率 | 250 kS/s | |||
魔术扫描 | √ | |||
输入范围 | 高增益 | 双极性 | - | |
单极性 | - | |||
低增益 | 双极性 | ±10, ±5, ±2.5, ±1.25 V | ||
单极性 | - | |||
触发模式 | 软件触发 | √ | ||
外部触发 | √ | |||
内部可编程Pacer | √ | |||
传输模式 | 查询 | √ | ||
中断 | √ | |||
模拟量输出 | 通道 | 2 | ||
分辨率 | 16-bit | |||
输出范围 | ±5 ,±10 , 0~5 , 0~10 V | |||
驱动能力 | ±5 mA | |||
数字量 I/O | 输入通道 | 32个可编程I/O通道 | ||
输出通道 | ||||
兼容性 | 5 V/TTL | |||
总线类型 | 通用 PCI | |||
Card ID | √ (4-bit) | |||
尺寸 ( mm2 ) | 169 &'and$'and; 105 | |||
接口 | DB-37 | 1 | ||
20-Pin | 2 | |||
Windows驱动 | √ | |||
VB,VC,Delphi例程 | √ | |||
LabView I/O驱动 | 8.2 | √ | ||
8.5 | √ | |||
Linux驱动 | √ | |||
DasyLab I/O驱动 | - |