PEX-P8POR8I CR信息

产品详细说明:

PCI-P16POR16/PEX-P16POR16i/PEX-P8POR8iPCI-P16POR16: 16-channel isolated digital input, 16-channel PhotoMos relay outputPEX-P16POR16i/P8POR8i: PCI Express, 16/8-channel isolated digital input, 16/8-channel PhotoMos relay output •Selectable DC signal input filter •AC signal input with filter •LED power indicator •Long life and high reliability PhotoMos relay •Low leakage current when PhotoMos relay is off •No contact bounce, no sparking •No acoustical noise •High speed DIO operation •Supports Plug & Play to obtain I/O resources •No more manually setting of I/O address and IRQ [PEX-P8POR8i/PEX-P16POR16i] •Supports PCI Express x1 •8/16 PhotoMos Relay output channels •8/16 Optical isolated digital input channels •Supports Card ID (SMD Switch) •Supports DO status Readback (Register Level) •2000 VDC photo-isolation protection[PCI-P16POR16] •Supports the +5 V PCI Bus •16 PhotoMos Relay output channels •16 Optical isolated digital input channels •5000 Vrms photo-isolation protection The PCI-P16POR16 is a PCI card supporting both the 5 V PCI bus, while

the PEX-P8POR8i/PEX-P16POR16i is a PCI Express card. Each contain 8

or 16 optically isolated input channels and 8 or 16 PhotoMos relay

output channels. Both the isolated DI channels and the PhotoMos relay

channels use a short optical transmission path to transfer an

electronic signal between elements of a circuit and keep them

electrically isolated. The PCI-P16POR16 provides 5000 Vrms and PEX-

P8POR8i/P16POR16i provide 2000 VDC for DI channel isolation

protection, allowing the input signals to be completely floated so as

to cut down ground loops, block voltage spikes, and isolate the host

computer from damaging voltages. PhotoMos relays are used where it is

necessary to control a circuit using a low-power signal (with

complete electrical isolation between the control and controlled

circuits), or where several circuits must be controlled by one

signal. The PEX-P16POR16i is fully compatible with the PCI-P16POR16,

and users can easily replace the PCI-P16POR16 with the PEX-P16POR16i

without any need for software/driver modification when using PCI

Express computers.

The PEX-P16POR16i/PEX-P8POR8i also adds a Card ID switch on-board.

Users can set Card ID and then recognizes the board by the ID via

software when using two or more PEX-P16POR16i/PEX-P8POR8i cards in

one computer. The PCI-P16POR16 and PEX-P16POR16i/PEX-P8POR8i can be

used in various applications, such as controlling the ON/OFF state of

external devices, driving external relays or small power switches,

activating alarms, contact closure, sensing external voltages or

switches, etc.

These cards support various OS versions, such as Linux, DOS, Windows

98/NT/2000 and 32/64-bit Windows 7/Vista/XP. DLL and Active X control

together with various language sample programs based on Turbo C++,

Borland C++, Microsoft C++, Visual C++, Borland Delphi, Borland C++

Builder, Visual Basic, C#.NET, Visual Basic.NET and LabVIEW are

provided in order to help users quickly and easily develop their own

applications. •DOS Lib and TC/BC/MSC sample program (with source codes) •DLL and OCX SDK for Windows 95/98/NT/2K. •DLL and OCX SDK for 32-bit and 64-bit Windows XP/2003/Vista/7. •VB/VC/Delphi/BCB/VB.NET/C#.NET/VC.NET/MATLAB sample programs with

source codes. •LabVIEW toolkit for Windows. •Driver for Linux. Model Name PCI-P16POR16 PEX-P16POR16i PEX-P8POR8i Digital Input Isolation Voltage 5000 Vrms (Photo-couple) 2000 VDC (Photo-couple) Channels 16 8 Input Voltage Logic 1: AC/DC 5 ~ 24 V (AC 50 ~ 1 kHz)Logic 0: AC/DC 0 ~ 1 V Input Impedance – 1.2 KΩ, 0.5 W – Response Speed Without Filter: 50 kHz (Typical)With Filter: 0.455 kHz(Typical) Relay Output Channels 16 8 Relay Type PhotoMos Relay(Form A) Contact Rating Load Voltage: 300 V (AC peak or DC)Load Current: 130 mA Operate Time 0.7 ms (typical) Release Time 0.05 ms (typical) Insulation Resistance 23 Ω Special LED Indicators Output status General Bus Type 5 V PCI, 32-bit, 33 MHz PCI-Express x1 Data Bus 16-bit Card ID No Yes (4-bit) I/O Connector Female DB37 x 140-pin box header x 1 Female DB37 x 1 Dimensions (L x W x D) 183 mm x 105 mm x 22 mm 173 mm x 113 mm x 22

mm 118 mm x 113 mm x 22 mm Power Consumption 800 mA @ +5 V Operating Temperature 0 ~ 60 °C Storage Temperature -20 ~ 70 °C Humidity 5 ~ 85% RH, non-condensing PCI-P16POR16 16-channel isolated digital input.16-channel PhotoMos

Relay output.Includes one CA-4037W cable and two CA-4002 D-Sub connectors. PCI-P16POR16 CR 16-channel isolated digital input.16-channel PhotoMos

Relay output (RoHS)Includes one CA-4037W cable and two CA-4002 D-Sub connectors. PEX-P8POR8i CR PCI Express x1, 8-channel isolated digital input.8-

channel PhotoMos Relay output (RoHS)Includes one CA-4002 D-Sub connector. PEX-P16POR16i CR PCI Express x1, 16-channel isolated digital

input.16-channel PhotoMos Relay output (RoHS)Includes one CA-4037W cable and two CA-4002 D-Sub connectors. CA-3710 DB-37 Male-Male D-sub cable 1 M (Cable for Daughter Board(45

°)) CA-3710D DB-37 Male-Male D-sub cable 1M (Cable for Daughter Board(180

°)) CA-3710DM DB-37 Male-Male Cable, 1.0 M, 180°. (RoHS) CA-3730DM DB-37 Male-Male Cable, 3.0 M, 180°. (RoHS) CA-3750DM DB-37 Male-Male Cable, 5.0 M, 180°. (RoHS) CA-4002 37-pin Male D-sub connector with plastic cover. CA-4037W 40-pin flat & D-sub 37-pin Female cable 24 cm. DB-37 Directly connect signal to D-sub 37-pin connector DN-37 DIN Rail Mounting 37-pin Connector I/O Card Main Page