日本XEBEC陶瓷纤维油石 磨石信息

The standard Xebec Ceramic Fiber Stone.Excellent polishing performance for material under HRC57.

标准型陶瓷纤维油石。对硬度HRC57以下之材料拥有杰出的抛光性能。

·Through the utilization of aerospace materials (Alumina Fiber Filaments), breakage, cracking, and chipping have been eliminated. High polishing efficiency can be ensured.

·No clogging. Uniformly fine finishes can be achieved.

·Thanks to the braided structure of the rod type, high polishing efficiency is possible even with the side, of the tool, and there is no splitting of the tip. (#220 is designed in a two way liner structure)

·Suitable for fine deburring.

·Higher polishing efficiency can be achieved by using the Meister Finishi with tools (electric, air, ultrasonic)

·Coarse grit type made of thick Alumina Fiber Filaments is ideal for removing EDM scales. Only XEBEC can manufacture it.

·

·本产品采用最适合研磨的结晶结构，实现了高研磨功效。

·本品纤维交叉排列，可纵横向滑动，提高研磨速度及油石强度。

·本品沙粒不易脱落，研磨工件表面不会有划痕产生。

·研磨时几乎不会有热度产生，不会造成工件变热和油石劣化。

·油石形状可任意修整，自由改变。

·Ideal for precise polishing of free surfaces, free curves, ribs, bosses, etc., of various forming molds (especially plastic mold).

·High finishing efficiency can be achieved without clogging, even for metals such as aluminum, copper, gun metal, etc., which clogs with common abrasive stones.

·Can be used in narrow areas where common abrasive stones cannot be used because of breaking.

·Use on complex shapes where uniform finishing could not be previously attained.

·Efficient EDM scales removal.

·陶瓷纤维油石（俗称超级油石）系将高纯度之陶瓷纤维与热塑性树脂结合制造而成，具有高硬度、耐磨耗及不易折断的特性。

·除可用于手持研磨外，且适用于气动、电动往复式研磨机。在超音波振动研磨机上使用，效果最佳。

·陶瓷纤维油石可在各种不同材质的模具钢上研磨加工。最适用于一般难研磨加工处，如窄沟壁、沟底、孔、滑痕、肋部及微小精细处。

·尤其对于放电加工后积碳层的快速去除及抛光效果更佳。

·The most widely used SS product is "Blue". (60% of all SS products) Please refer to the line graph.

·Users of S‘s “Blue” use it to achieve surface roughness shown by

·The same degree of surface roughness can be achieved by XEBEC's "Orange"

·For the user to achieve this surface roughness using S's "Blue" would result in the finishing removal rate shown in bar graph ;Using XEBEC's "Orange" would result in bar graph ,making it 4 times more efficient in polishing.

*1.5mm, 2.0mm and 3.0mm thickness products are available.