DIO-144 CR信息

产品详细说明:

	The DIO-144/96 provides 144/96 TTL digital I/O lines. The DIO-144/96 emulates 8255 mode 0 and has an increased output current of 15 mA (source) and 64 mA (sink) , allowing it to control LED, relay, etc. The DIO-144/96 consists of eighteen 8 bit bi-directional ports and 2 input lines for interrupt enable and interrupt. The 8 bit ports are named port A(PA),port B(PB) and port C(PC). The port C can be split into two four bit. All port are configured as inputs upon power-up or reset. The DIO-144/96 uses 4 consecutive I/O locations in I/O addressing space. The base address is selectable from 200 to 3FF hex. The interrupt signal can be connected to any of the interrupt levels 2 through 15 .
	back
	·Double side SMT , short card, power saving ·DIO-144 : 144 digital I/O linesDIO-96 : 96 digital I/O lines ·Emulate 8255 mode 0 (Basic Input / Output mode) ·Buffer output for higher driving capability than 8255 ·Register compatible to 722 series ·Programmable interrupt handling ·DIO-144 : Six 50-pin HeaderDIO-96 : Four 50-pin Header ·Output status readback
	back
	·Factory automation ·Product test ·Test automation ·Digital I/O control ·Alarm monitoring ·4-channel SSR Output Daughter Board
	back
	·DOS sample program(with source codes) ·DLL and OCX SDK for Windows 98/NT/2000 ·DLL and OCX SDK for 32-bit Windows XP/2003/Vista/7 ·VB/VC/Delphi/BCB sample programs with source codes are included ·LabVIEW toolkit for Windows ·Driver for Linux and DasyLab
	back
	Model Name DIO-96 DIO-144 Digital Input Channels 96 (OPTO-22 compatible) 144 (OPTO-22 compatible) Compatibility 5 V/TTL Input Voltage Logic 0: 0.8 V max.Logic 1: 2.0 V min. Response Speed 1.0 MHz (Typical) Digital Output Channels 96 (OPTO-22 compatible) 144 (OPTO-22 compatible) Compatibility 5 V/TTL Output Voltage Logic 0: 0.4 V max.Logic 1: 2.4 V min. Output Capability Sink: 0.8 mA @ 0.8 VSource: -2.4 mA @ 2.0 V Response Speed 1.0 MHz (Typical) General Bus Type ISA I/O Connector 50-pin box header x 4 50-pin box header x 6 Dimensions (L x W x D) 182 mm x 120 mm x 22 mm Power Consumption 800 mA @ +5 V 700 mA @ +5 V Operating Temperature 0 ~ 60 °C Storage Temperature -20 ~ 70 °C Humidity 5 ~ 85% RH, non-condensing
	back
	DIO-96 CR 96-channel Digital I/O Board (RoHS) DIO-144 CR 144-channel Digital I/O Board (RoHS)
	back
	CA-5002 50-pin flat cable 20 cm CA-5015 50-pin flat cable 1.5 M DB-24P 24-channel Photo Couple Isolated Digital Input Daughter Board DB-24R 24-channel Relay Output Daughter Board DB-24C 24-channel Open Collector Output Daughter Board DB-16P8R 16-channel Isolated Digital Input And 8-channel Relay Output Daughter Board DB-24POR 24-channel Photo Mos Relay Output Daughter Board DB-24PR 24-channel Power Relay Output Daughter Board
	back
	I/O Card Main Page

The DIO-144/96 provides 144/96 TTL digital I/O lines. The DIO-144/96 emulates 8255 mode 0 and has an increased output current of 15 mA (source) and 64 mA (sink) , allowing it to control LED, relay, etc. The DIO-144/96 consists of eighteen 8 bit bi-directional ports and 2 input lines for interrupt enable and interrupt. The 8 bit ports are named port A(PA),port B(PB) and port C(PC). The port C can be split into two four bit. All port are configured as inputs upon power-up or reset. The DIO-144/96 uses 4 consecutive I/O locations in I/O addressing space. The base address is selectable from 200 to 3FF hex. The interrupt signal can be connected to any of the interrupt levels 2 through 15 . back •Double side SMT , short card, power saving •DIO-144 : 144 digital I/O linesDIO-96 : 96 digital I/O lines •Emulate 8255 mode 0 (Basic Input / Output mode) •Buffer output for higher driving capability than 8255 •Register compatible to 722 series •Programmable interrupt handling •DIO-144 : Six 50-pin HeaderDIO-96 : Four 50-pin Header •Output status readback back •Factory automation •Product test •Test automation•Digital I/O control •Alarm monitoring •4-channel SSR Output Daughter Board back •DOS sample program(with source codes) •DLL and OCX SDK for Windows 98/NT/2000 •DLL and OCX SDK for 32-bit Windows XP/2003/Vista/7 •VB/VC/Delphi/BCB sample programs with source codes are included •LabVIEW toolkit for Windows •Driver for Linux and DasyLab back Model Name DIO-96 DIO-144 Digital Input Channels 96 (OPTO-22 compatible) 144 (OPTO-22 compatible) Compatibility 5 V/TTL Input Voltage Logic 0: 0.8 V max.Logic 1: 2.0 V min. Response Speed 1.0 MHz (Typical) Digital Output Channels 96 (OPTO-22 compatible) 144 (OPTO-22 compatible) Compatibility 5 V/TTL Output Voltage Logic 0: 0.4 V max.Logic 1: 2.4 V min. Output Capability Sink: 0.8 mA @ 0.8 VSource: -2.4 mA @ 2.0 V Response Speed 1.0 MHz (Typical) General Bus Type ISA I/O Connector 50-pin box header x 4 50-pin box header x 6 Dimensions (L x W x D) 182 mm x 120 mm x 22 mm Power Consumption 800 mA @ +5 V 700 mA @ +5 V Operating Temperature 0 ~ 60 °C Storage Temperature -20 ~ 70 °C Humidity 5 ~ 85% RH, non-condensing back DIO-96 CR 96-channel Digital I/O Board (RoHS) DIO-144 CR 144-channel Digital I/O Board (RoHS) back CA-5002 50-pin flat cable 20 cm CA-5015 50-pin flat cable 1.5 M DB-24P 24-channel Photo Couple Isolated Digital Input Daughter Board DB-24R 24-channel Relay Output Daughter Board DB-24C 24-channel Open Collector Output Daughter Board DB-16P8R 16-channel Isolated Digital Input And 8-channel Relay Output Daughter Board DB-24POR 24-channel Photo Mos Relay Output Daughter Board DB-24PR 24-channel Power Relay Output Daughter Board back

I/O Card Main Page