ISO-P32C32 CR信息

产品详细说明:

The ISO-P32C32 has 32 channels of optically isolated digital inputs and 32 channels of optically isolated digital outputs, arranged into four isolated banks. Each input channel use a photo-coupler input which allows either internal isolated power supply or external power selected by jumper. Each digital output offers a darlington transistor and integral suppression diode for inductive load. Isolated input channels 0 ~ 15 are designed into group A and channels 16 ~ 31 are designed into group B. Isolated output channels are designed into group C and group D. The power supply of the input port may use the external power or the power from the PC side using DC/DC converter. The power supply of the output port should use the external power. This interface board is easily installed in any PC. The board interface to field logic signals, eliminating ground-loop problems and isolating the host computer from damaging voltages. The ISO-P32C32 has one 37-pin D-Sub Connector and one 40-pin male header. The 40-pin to DB-37 flat cable is used to fix with the case. The user can connect the digital signal through the second D-Sub connector . Each D-Sub connector contains 16 input channels and 16 output channels. back •32-channel optically isolated digital input•32-channel optically isolated digital output/Open-collector•DC/DC converter build-in•3000 Vrms isolation voltage •Interrupt handling•Interrupt source : channel 0 and channel 16 back •Factory Automation•Product Test•Laboratory Automation back •DOS sample program(with source codes) •DLL and OCX SDK for Windows 98/NT/2000 •DLL and OCX SDK for 32-bit Windows XP/2003/Vista/7 •VB/VC/Delphi/BCB sample programs with source codes are included •LabVIEW toolkit for Windows •Driver for Linux and DasyLab back Digital Input Isolation Voltage 3750 Vrms (Using external power)3000 Vrms (Using internal power) Channels 32 Compatibility Photo coupler isolated Input Voltage Logic 0: 0 ~ 1 VLogic 1: 9 ~ 24 V Input Impedance 3 KΩ, 0.5 W Response Speed 4 kHz (Typical) Digital Output Isolation Voltage 3750 Vrms (Using external power) Channels 32 Compatibility Sink, Open Collector External Voltage 5 ~ 30 VDC (max.) Output Capability 100 mA for one channel @ 100% duty100 mA for all channels @ 100% duty Response Speed 4 kHz (Typical) General Bus Type ISA Data Bus 8-bit I/O Connector Female DB37 x 140-pin Box header x 1 Dimensions (L x W x D) 163 mm x 115 mm x 22 mm Power Consumption 600 mA @ +5 V Operating Temperature 0 ~ 60 °C Storage Temperature -20 ~ 70 °C Humidity 5 ~ 85% RH, non-condensing back ISO-P32C32 32-channel isolated digital I/O boardIncludes one CA-4037W cable and two CA-4002 D-Sub connectors. ISO-P32C32 CR 32-channel isolated digital I/O board (RoHS)Includes one CA-4037W cable and two CA-4002 D-Sub connectors. back CA-3710 DB-37 Male-Male D-sub cable 1 M (Cable for Daughter Board(45°)) CA-3710D DB-37 Male-Male D-sub cable 1M (Cable for Daughter Board(180°)) CA-3710DM DB-37 Male-Male Cable, 1.0 M, 180°. (RoHS) CA-3730DM DB-37 Male-Male Cable, 3.0 M, 180°. (RoHS) CA-3750DM DB-37 Male-Male Cable, 5.0 M, 180°. (RoHS) CA-4002 37-pin Male D-sub connector with plastic cover CA-4037W 40-pin flat & D-sub 37-pin Female cable 24 cm. DB-37 Directly connect signal to D-sub 37-pin connector DN-37 DIN Rail Mounting 37-pin Connector DB-16P16R 16-channel input terminal and 16-channel relay output board Include : CA-3710D Male- Male D-sub Cable 1.0 M

back

I/O Card Main Page