PISO-P8R8U CR信息

产品详细说明:

PISO-P8R8/PISO-P8R8UPISO-P8R8:PCI Bus, 8 Isolated Digital Input and 8 Relay Output BoardPISO-P8R8U: Universal PCI, 8 Isolated Digital Input and 8 Relay Output Board •Support the +5 V PCI bus for PISO-P8R8 •Support the +3.3 V/+5 V PCI bus for PISO-P8R8U •Card ID function for PISO-P8R8U •8 relay output channels •8 optically isolated digital input channels •Selectable DC signal input filter •AC Signal input with filter •Onboard relay output status LED indicators •Supports Plug & Play to obtain I/O resources •No more manually settings of I/O address and IRQ The PISO-P8R8U card is the new generation product that ICP DAS provides to meet RoHS compliance requirement. The new PISO-P8R8U card is designed as a drop-in replacement for the PISO-P8R8, and users can replace the PISO-P8R8 by the PISO-P8R8U directly without software/driver modification.

The PISO-P8R8U universal PCI card supports 3.3 V/5 V PCI bus while the PISO-P8R8 supports 5 V PCI bus. These cards provide 8-channel optically isolated DI and an 8-channel electromechanical relay output board. These DI channels provide 3750 Vrms isolation protection that allows the input signals to be completely floated so as to prevent ground loops and isolate the host computer from damaging voltages. Relays are used where necessary to control a circuit using a low-power signal (with complete electrical isolation between the control and controlled circuits), or where several circuits must be controlled using one signal. The PISO-P8R8/P8R8U can be used in varous applications, such as controlling the ON/OFF state of external devices, driving external relays or small power switches, activating alarms, contact closure, sensing external voltages or switches, etc. These cards contain a single DB-37 connector for easy wiring.

The PISO-P8R8U also adds a Card ID switch on-board. Users can set Card ID and then recognize the board by the ID via software when using two or more PIO-P8R8U cards in one computer.

These cards support various OS versions, such as Linux, DOS, Windows 98/NT/2000 and 32/64-bit Windows 7/Vista/XP. DLL and Active X control together with various language sample programs based on Turbo C++, Borland C++, Microsoft C++, Visual C++, Borland Delphi, Borland C++ Builder, Visual Basic, C#.NET, Visual Basic.NET and LabVIEW are provided in order to help users quickly and easily develop their own applications. •Factory automation •Product test •Laboratory automation •DOS Lib and TC sample program (with source codes) •DLL and OCX SDK for Windows 95/98/NT/2K. •DLL and OCX SDK for 32-bit and 64-bit Windows XP/2003/Vista/7. •VB/VC/Delphi/BCB/VB.NET/C#.NET/VC.NET/MATLAB sample programs with source codes are included. •LabVIEW toolkit for Windows. •Driver for Linux. Model Name PISO-P8R8 PISO-P8R8U Digital Input Isolation Voltage 5000 Vrms (Photo-couple) Channels 8 Input Voltage Logic 1:AC/DC 5 ~ 24 V(AC 50 ~ 1 kHz)Logic 0: AC/DC 0 ~ 1 V Input Impedance 1.2 KΩ, 0.5 W 1.2 KΩ, 1 W Response Speed Without Filter: 50 kHz (Typical)With Filter: 0.455 kHz(Typical) Relay Output Channels 8 Relay Type SPST N.O.(Form A) Contact Rating AC: 250 V@1.6 ADC: 30 V@5 A Operate Time 6 ms (typical) Release Time 3 ms (typical) Insulation Resistance 1000 MΩ Life Mechanical: 2,000,000 ops.Electrical: 100,000 ops. General Bus Type 5 V PCI, 32-bit, 33 MHz 3.3 V/5 V Universal PCI, 32-bit, 33 MHz Data Bus 8-bit Card ID No Yes (4-bit) I/O Connector Female DB37 x 1 Dimensions (L x W x D) 149 mm x 105 mm x 22 mm Power Consumption 300 mA @ +5 V Operating Temperature 0 ~ 60 °C Storage Temperature -20 ~ 70 °C Humidity 5 ~ 85% RH, non-condensing PISO-P8R8 8- channel Relay Output with isolated digital input Board.Includes one CA-4002 D-Sub connector. PISO-P8R8 CR 8- channel Relay Output with isolated digital input Board (RoHS)Includes one CA-4002 D-Sub connector. PISO-P8R8U CR Universal PCI, 8-channel Relay Output with isolated digital input Board (RoHS)Includes one CA-4002 D-Sub connector. CA-3710 DB-37 Male-Male D-sub cable 1 M (Cable for Daughter Board(45°)) CA-3710D DB-37 Male-Male D-sub cable 1M (Cable for Daughter Board(180°)) CA-3710DM DB-37 Male-Male Cable, 1.0 M, 180°. (RoHS) CA-3730DM DB-37 Male-Male Cable, 3.0 M, 180°. (RoHS) CA-3750DM DB-37 Male-Male Cable, 5.0 M, 180°. (RoHS) CA-4002 37-pin Male D-sub connector with plastic cover. DB-37 Directly connect signal to D-sub 37-pin connector DN-37 DIN Rail Mounting 37-pin Connector I/O Card Main Page