3A带充放电保护电源箱Powerwithchargeanddischargeprotect信息

产品详细说明:

产品说明:

·产品型号：PSC-3A1

·本电源采用高档元器件，运用国际先进工艺制造流程，佰分之佰质量保证。适用范围：·本电源适用于楼宇对讲、各种出入口门禁控制器，报警系统等，特别适用于各种电锁。功能待性：·交流输入：标准AC 220V 60HZ·直流输出：标准 DC12V 3A·直接控制电锁：可减小门禁控制器的负荷，节省工程布线，减少故障隐患。·设NC/NO输出，可控制各种类型的电锁。设延时控制电路，开锁时·时间设置：0~10秒。·带UPS接口，装电池后停电可供电。·设开门按钮输入，可直接开启电锁。

.充电放电保护功能：当停电后，电池放电到11V左右，继电器将自动断开，并停止工作。保护电池，且避免因电压低，不打不开门。·外观尺寸：(铁盒) 285*235*70mmmm

包装清单：

.1*电源箱

Specification:

Feature:

1.Electric lock supply power and 12V output are Regulated output,so power supply constant,To extend the electric locks lifetime.

2.Using high-power zener regulate power supply,to realize more high-power output.

3.Selection of high quality work frequency transformer, no interference, no noise;

4.NC and NO output,can control kind of electric locks,to reduce access control load

5.Built-in adjusting knob to adjust opening door delay time from 0~10 second adjustable.

6.Setting exit button input,can open lock directly.

7.Setting auto-protect function,built-in fuse;with charge and discharge circuit, can place 12V7AH battery

8.With battery charge protecting function.when power off, then,battery discharge to about 11V,relay will auto-cut off and stop work, to ensure battery discharge destroy,as the same time ,avoid because low power supply doesnt open door

Parameter:

Voltage:

.Input: AC 220V

.Output:DC 9~14V(adjustable) 3A

.Working Temperature:-20~55degree

.Humidity:30~90%

.With NO,NC,COM and UPS

.Can connect building intercom to control lock

.Application Field:Access control,Electric locks

.Dimension:285*235*70mm

Package Included:

• 1x Power supply